Hard Lock Set Screw Dimensions - HARD LOCK Industry Co., Ltd.

Hard Lock Set Screw Dimensions (spacing rod type)

Model	Screw diameter	Pitch	Set screw			Lock screw			Thread		L	Hexagonal socket &		Pin diameter
Model	S,S1	P	H	tole- rance	t1	h	t2	tole- rance	Min	Max	L	B	tole- rance	D	tole- rance
HLS12CCL100	M12	1.75	15	±0.4	≥4	13	12	+0 -0.3	28	30	100	6	+0.15 +0.02	8	+0 -0.2
HLS12CFL100		1.5									100
HLS12CCL200		1.75									200
HLS12CFL200		1.5									200
HLS16CCL100	M16	2	20	±0.4	≥6	16	12	+0 -0.3	36	38	100	8	+0.15 +0.02	12	+0 -0.2
HLS16CFL100		1.5									100
HLS16CCL200		2									200
HLS16CFL200		1.5									200
HLS16CCL250		2									250
HLS16CCL300		2									300
HLS20CCL100	M20	2.5	25	±0.4	≥6	15	12	+0 -0.3	40	42	100	10	+0.20 +0.02	16	+0 -0.2
HLS20CFL100		1.5									100
HLS20CCL200		2.5									200
HLS20CFL200		1.5									200
HLS20CCL250		2.5									250
HLS20CCL300		2.5									300
HLS24CCL100	M24	3	35	±0.5	≥7	19	15	+0 -0.3	54	55	100	12	+0.30 +0.02	20	+0 -0.2
HLS24CFL100		1.5									100
HLS24CCL200		3									200
HLS24CFL200		1.5									200
HLS24CCL250		3									250
HLS24CCL300		3									300
HLS30CCL100	M30	3.5	40	±0.5	≥7	24	20	+0 -0.3	64	66	100	17	+0.30 +0.02	24	+0 -0.2
HLS30CFL100		1.5									100
HLS30CCL200		3.5									200
HLS30CFL200		1.5									200
HLS30CCL250		3.5									250
HLS36CCL100	M36	4	40	±0.5	≥7	28	20	+0 -0.3	68	70	100	17	+0.30 +0.02	30	+0 -0.2
HLS36CFL100		1.5									100
HLS36CCL200		4									200
HLS36CFL200		1.5									200
Material: S45C heat treated steel (surface hardness HRC30~43) surface treatment:black oxide finish(magnetite coating) JIS S45C (Property Class 8=Min. strength 800MPa(N/mm2) *JIS SCM435 (Property Class 10=Min. strength 1040MPa(N/mm2)

Model	Screw diameter	Pitch	Set screw			Lock screw			Thread		L	Hexagonal socket &		Pin diameter		Pin hole diameter
Model	S,S1	P	H	tole- rance	t	h	t2	tole- rance	Min	Max	L	B	tole- rance	D	tole- rance	A, A1	tole- rance
HLS16DCL100	M16	2	20	±0.4	≥6	16	12	+0 -0.3	36	38	100	8	+0.15 +0.02	12	+0 -0.2	7	±0.2
HLS16DFL100		1.5									100
HLS16DCL200		2									200
HLS20DCL100	M20	2.5	25	±0.4	≥6	15	12	+0 -0.3	40	42	100	10	+0.20 +0.02	16	+0 -0.2	10	±0.2
HLS20DFL100		1.5									100
HLS20DCL200		2.5									200
HLS24DCL100	M24	3	35	±0.5	≥7	19	15	+0 -0.3	53	55	100	12	+0.30 +0.02	20	+0 -0.2	12	±0.2
HLS24DFL100		1.5									100
HLS24DCL200		3									200
HLS30DCL100	M30	3.5	40	±0.5	≥7	24	20	+0 -0.3	64	66	100	17	+0.30 +0.02	24	+0 -0.2	17	±0.2
HLS30DCL200	M30	3.5	40	±0.5	≥7	24	20	+0 -0.3	64	66	200	17	+0.30 +0.02	24	+0 -0.2	17	±0.2
HLS36DCL100	M36	4	40	±0.5	≥7	28	20	+0 -0.3	68	70	100	17	+0.30 +0.02	30	+0 -0.2	17	±0.2
HLS36DCL200	M36	4	40	±0.5	≥7	28	20	+0 -0.3	68	70	200	17	+0.30 +0.02	30	+0 -0.2	17	±0.2
Material: S45C heat treated steel (surface hardness HRC30~43) surface treatment: black oxide finish (magnetite coating) JIS S45C (Property Class 8=Min. strength 800MPa(N/mm2) *JIS SCM435 (Property Class 10=Min. strength 1040MPa(N/mm2)